HiFi Tuning logo


HiFi Tuning produce a range of accessory items and we are pleased to announce that we are acting as their UK distributor.


HiFi TUNING PRODUCTS - SUMMER 2022


**NEW** - HiFi Tuning Fuse Holder

Designed to replace the conventional mRCD switched modules in DIN-standard distribution boxes, the new HiFi Tuning Fuse Holder (and built-in SP/ST switch) can improve the sound quality of your system by eliminating the sometimes "noisy" electronic sensor (from the ring circuit you use for listening to music), and replacing the module with a high quality, high rated, replaceable wire fuse, rated at 16 or 32 Amps (as used on most UK ring circuits).

The Fuse Holder incorporates a switch (for isolating wall sockets when required) and a RED light to show power is active through the device.

The internal parts are all Gold plated and Cryo-Treated, of course !

Specifications
Ue - 240 Volts
Ie - 32 Amps
Uimp - 6 kVolts
Ui - 800 Volts
Meets IEC 60947-3 and IEC 60269

It is highly recommended that you use the services of a qualified electrician to install this !


HiFi Tuning Fuse Holder - - - HiFi Tuning Fuse Holder carton

The Fuse Holder can be supplied without the internal fuse, or including a 16 Amp or 32 Amp Supreme 3 fuse as required.

Availability: NOW

----------------------------------------------------------------

**NEW** - HiFi Tuning C7 Rewireable Connector

There are many replacement IEC C13/14 and C19/20 connectors available, but not so many quality rewireable C7 connectors.

But HiFi Tuning have just made available a quality C7 connector, which can be used, with suitable high quality mains cables (such as Supra LoRad), to improve the performance of audio equipment fitted with "Figure 8" sockets.


HiFi Tuning C7 Connector - - - HiFi Tuning C7 Connector - side view


Availability: NOW

----------------------------------------------------------------

**NEW** - HiFi Tuning NanoTuch and Nano Liquid CD/DVD Cleaning Pad and Spray

HiFi Tuning have developed the NanoTuch (aka NanoTouch) CD/DVD Micro-Fiber Cleaning Cloth which can help remove dust, fingerprints from the surface of the media.

You should keep the cloth clean after use, as it will "pick up" the dust from the disc and if the cloth is not kept clean afterwards, further use could cause scratches on a second disc...so be careful.

Used in conjunction with the NanoTouch, is the HiFi Tuning Nano Liquid/Spray. Just spray the media disc and wipe off with the NanoTouch. Its use help prevents fogging and it has an anti-static property, to help keep the disc dust-free.

Nano Liquid/Spray meets ASTM F963 standards and is non-toxic and environmentally friendly !


HiFi Tuning NanoTuch CD/DVD Cleaning Cloth - - - HiFi Tuning CD/DVD Nano Liquid/Spray


Availability: NOW

----------------------------------------------------------------

Continuing Products

HiFi Tuning Fuses for use with quality audio and AV products

HiFi Tuning Supreme 3 20mm Fuse


We are distributing their range of deep Cryo-treated fuses, which are hand-made in Germany and which are available in a number of types:

UK Mains Fuses
----------------------

For UK mains plugs we have their: Gold2 in 10 Amp and 13 Amp fuse versions
and also available are the Supreme3 13 Amp fuses
HiFi Tuning Supreme 3 10 Amp Silver UK Mains Fuse
HiFi Tuning Supreme 3 13 Amp Silver/Copper UK Mains Fuse

These are in standard UK main fuse size, which is 6.3mm (diameter) x 25.4mm (length).


Internal Equipment Fuses
----------------------------------

* For internal use within most audio equipment power supplies (for instance), we have 5mm (dia) x 20mm (l) fuses in the T version, which is an anti-surge (ie time-lag or "slow-blow") type fuse, across a range of values (see below).


These are available in either the Silver/Gold ("Silber/Gold")
or Copper ("Kupfer") versions.
HiFi Tuning Supreme 3 Silver/Gold Silber/Gold Fuse
HiFi Tuning Supreme 3 Copper Kupfer Fuse


Other types of fuses
---------------------------

We are also able to supply 5mm x 20mm Fast Blow fuses in Silver/Gold version, in a range of values.

Some higher-end products use 6.3mm (dia) x 32mm (l) fuse types, (commonly found in American-manufactured products) and for these we can supply both Fast and Slow Blow versions.

A further option are the 10.3mm (dia) x 38mm (l) fuses, as used on mains distribution boxes.


What's the difference between the different fuse types?
------------------------------------------------------------------------
HiFi Tuning also offer "F" (Fast Blow) type fuses in both the 20mm and 32mm types. These are principally used in the output sections of some amplifiers and may also be used on the input to some loudspeakers and/or individual drive units, such as HF units (aka "tweeters").


Where can I buy these products in the UK?
-------------------------------------------------------

A number of UK dealers have these products available already, including:

Analogue Seduction

FutureShop

Mains Cables R Us

Audio Sanctuary



Usage:
Mains Fuse for UK mains plugs Mains Fuse for UK mains plugs Normally used on amplifier outputs or loudspeakers inputs For internal power supplies of audio equipment For internal power supplies of audio equipment For internal power supplies of audio equipment    
Description of available versions and sizes:
Gold2

Silver
Supreme3

Silver/Copper
Supreme3 Supreme3
Silver/Gold

Silber/Gold
(99% Silver
1% Gold)
Supreme3 Copper

Kupfer
(100% Cardas Grade1 Copper)
Supreme3 Copper XT Gold2 Supreme3
Fast Blow

Fast Blow

Fast-Blow



Slow-Blow
(Time-Lag /
Anti-Surge)

Slow-Blow
(Time-Lag /
Anti-Surge)

Slow-Blow
(Time-Lag /
Anti-Surge)

gg/gl

gg/gl

6.3mm x 25.4mm
(diameter x length)
6.3mm x 25.4mm
(diameter x length)
5mm x 20mm
(diameter x length)
or
6.3mm x 32mm
(diameter x length)
5mm x 20mm
(diameter x length)
or
6.3mm x 32mm
(diameter x length)
5mm x 20mm
(diameter x length)
5mm x 20mm
(diameter x length)
10.3mm x 38mm
(diameter x length)
10.3mm x 38mm
(diameter x length)

White Cartridge

Black
Cartridge

Cartridge type

Cartridge type

Cartridge type

Cartridge type

Cartridge type

Cartridge type
Values of fuses currently available:
    250mA
315mA
400mA
500mA
630mA
800mA
100mA (not 32mm)
125mA (not 32mm)
160mA (not 32mm)
200mA (not 32mm)
250mA
315mA
400mA
500mA
630mA
800mA
100mA
125mA
160mA
200mA
250mA
315mA
400mA
500mA
630mA
800mA
     
Black logo = 10 Amp

Red logo
= 13 Amp
Gold logo
= 13 Amp
1A
1.25A
1.6A
2A
2.5A
3A
3.15A
4A
5A
6.3A
8A
10A
12 A (32mm only)
12.5A
15A
16A
20A
1A
1.25A
1.6A
1.8A (not 32mm)
2A
2.5A
3A
3.15A
4A
5A
6A
6.3A
7A
8A
10A
12.5A
15A
16A
20A
1A
1.25A
1.6A
1.8A
2A
2.5A
3A
3.15A
4A
5A
6A
6.3A
7A
8A
10A
1.6A
3.15A
6.3A
1A
1.8A
5A
10A
16A
20A
25A
32A
16A
20A
25A
32A
(if item is not currently available then value is shown thus 2A)

Note:

Please note: It is IMPERATIVE that the VALUE and TYPE of fuse is correctly specified if you are replacing any existing fuse.

Incorrect use will invalidate ANY warranty (implied or otherwise). If a fuse fails it is more likely to be due to a fault condition, than a problem with the fuse itself.

(Click here for information on why fuses can fail).

Do NOT use a Fast Blow (F) fuse instead of an anti-surge (T) type fuse and vice versa.

Do NOT use a different Amp rating compared to that which is recommended by the product manufacturer (or which is fitted to the product already) - under specifying the fuse value can cause it to "blow" prematurely and likewise over specifying the value can cause the equipment to be damaged in the event of an over-voltage situation.

Replacing internal fuses within ANY product can invalidate your warranty for the equipment. Likewise, care MUST be taken when replacing any fuses - make sure the equipment is turned OFF and has been unplugged from the mains especially before changing internal fuses.


NEVER check any HiFi Tuning fuse(s) with a normal, cheap multimeter, as you can destroy the fuses immediately. All fuses are factory checked (before being packed and imported into UK), using High-End Measuring Equipment.

If in ANY doubt, please consult a qualified electrician or service engineer.



Information and/or prices on this website subject to change without notice. E & O.E.
(last update: 14th June 2022)


Back to Wavelength Distribution home page